Siam Master Precision Tool LTD (SMPT)

HOME PAGE
Product (สินค้าต่างๆ)
News & Activities
ควบคุมคุณภาพ (Quality Department /Knowledge)
About Us
Inquiry
Contact us (ติดต่อเรา)

HOME PAGE
Product (สินค้าต่างๆ)
News & Activities
ควบคุมคุณภาพ (Quality Department /Knowledge)
About Us
Inquiry
Contact us (ติดต่อเรา)

Planetary Rolling Dies Thailand
• After Heating Process we produce by CNC profile grinding.
• Easy setting and perfect thread form.planetary thread rolling machines (Videx, Sakamura, Sacma-Ingramatic, Omega, Prutton, Ruja, Eagle, Seny, Izpe, etc.) and many different thread types such as metric, trapezoidal, annular, knurls, etc.

Rotary Planetary Thread Rolling Is widely used for high production and for thread less than diameter of 12 mm, a system that includes a rotating roller and a fixed segment, both threaded with the characteristics of the thread to be generated. The method, illustrated schematically in Figure 12, allows to obtain very high productions , up to 1600 parts per minute, because are eliminated all passive time in fact, during every revolution of the roller many thread are executed.

ROTARY TYPE THREAD ROLLING DIES (RCD・RSD)Rotary Type Thread Rolling Dies (RCD・RSD)

We are able to made a wide range of custom made planetary dies for all type of planetary thread rolling machines (E.W. Menn, Capelli, Nedschroef, Pressvit, Crimella, Sima, Salvi, Key, Waterbury Farrel, Videx, Sakamura, Sacma-Ingramatic, Omega, Prutton, Ruja, Eagle, Seny, Izpe, etc.) and many different thread types such as metric, trapezoidal, annular, knurls, etc.

Also we design and manufacturing of high performance and long life planetary nail dies for the production of nails.

To order planetary dies please offer below data:

make of machine, model, machine specification, no. of pieces;
rotar, segments, depth of face, (width of face);
thread information: length on work, major (nominal diameter), number of threads/inch or pitch mm, thread form, class of thread / thread tolerance;
for nail dies - annular part outside diameter, blank diameter, form, pitch, direction of rotation (cw/ccw), rotar starts, number of lobes on cam.
material of your products or material of planetary dies;
potential addition requirements.

messageImage1686376403982

segment-holder

M/C MODEL	ØD (mm)	ØSD (mm)	Ød (mm)	K (mm)	SEGMENTS / SET	M/C MODEL	ØD (mm)	ØSD (mm)	Ød (mm)	K (mm)	SEGMENTS / SET
HILGELAND SW0	85	120	40	12	4	WATERBURY 1	177.8	241.3	127	12.7	3 slotted
INGRAMATIC GR1	85	120	40	10	4	WATERBURY 10	190.5	241.3	127	12.7	3 slotted
MENN RW3	85	120	40	10	4	SIMA RAP7	190.5	240	127	12.7	3 slotted
MENN RW5	80	120	40	12	4	CRIMELLA RUT/T1	222.25	300	150	12	3
OMEGA RR3	80	120	40	10	4	INGRAMATIC GR3	203.2	280	127	12.7	3
OMEGA RR4	80	120	40	10	4	SENY D12-TRS	203.2	280	127	12.7	3
VIDEX VA0	80	120	40	10	4	OMEGA RR10	203.2	280	127	12.7	3
SIMA RAP4	75	120	40	10	3	PRESSAVIT R112	203.2	280	127	12.7	3
GREFFE 2/4	102	150	60	18	4	PRUTTON 150RKEE	231.8	304.8	177.8	12.7	4
GREFFE 2/6	108	170	60	18	3	SACMA RU2TG	215.9	280	177.8	12.7	3
FRAY NF1037	177.8	222.25	133.35	12.7	3	SIMA RAP10	222.25	304.8	127	12.7	3 slotted
FRAY 28591	177.8	222.25	133.35	12.7	3	SIMA RAP11	222.25	304.8	127	12.7	3 slotted
CAPELLI 106	184.15	241.3	127	12.7	4	SIMA RAP12	222.25	304.8	127	12.7	3 slotted
CAPELLI 108	184.15	241.3	127	12.7	4	VIDEX VA2	222.25	300	150	12	3
CAPELLI 206	184.15	241.3	127	12.7	4	VIDEX VS2	222.25	300	150	12	3
HILGELAND SW2	190.5	241.3	127	12.7	4	VIDEX V-15	222.25	300	150	12	4
INGRAMATIC GR2	184.15	241.3	127	12.7	4	VIDEX VAS20	222.25	300	150	12	3
SENY D-8-TRS	184.15	241.3	127	12.7	4	VIDEX VA20	222.25	300	150	12	3
NEDSCHROEF BS2	190.5	241.3	127	12.7	4	PRUTTON 150RKE	241.3	304.8	177.8	12.7	4
PRUTTON 75RKG	184.15	241.3	127	12.7	4	PRUTTON 155TH	228.6	304.8	190.5	no keyway	5
PRUTTON 75RTHE	177.8	241.3	140	No Keyway	5	PRUTTON 155AVB	228.6	304.8	177.8	12.7	5
PRUTTON 75RKE	184.15	241.3	127	12.7	5	RUJA No6	266.7	342.9	152.4	15.86	3
VIDEX VA1	190.5	241.3	127	12.7	4	SAKAMURA SSR50	241.3	340	127	15.86	3
VIDEX VS1	190.5	241.3	127	12.7	4	VIDEX VA25	241.3	342.9	167.5	15.86	3
VIDEX V5	190.5	241.3	127	12.7	4	VIDEX VS25	241.3	342.9	167.5	15.86	3
VIDEX VA10	190.5	241.3	127	12.7	4	VIDEX VAS-25D	254	342.9	167.5	15.86	3
VIDEX VS10	190.5	241.3	127	12.7	4	WATERBURY 20	266.7	342.9	152.4	15.86	3
VIDEX VAS10	190.5	241.3	127	12.7	4	NEDSCHROEF BS3	266.7	342.9	152.4	15.86	4
VIDEX VAS 10D	190.5	241.3	127	12.7	4	NEDSCHROEF BS4	266.7	342.9	152.4	15.86	3
CAPELLI 101	184.15	241.3	140	No Keyway	5	PRUTTON 200RKE	323.85	419.1	228.6	18	3 or 4
BEARCAT No 30	190.5	240	127	12.7	3	PRUTTON 200RKEE	323.85	419.1	228.6	18	3 or4
CARLO SALVI 502R	190.5	241.3	127	12.7	3	PRUTTON 200RK 7K	323.85	406.4	228.6	18	4
HARTFORD PTR	190.5	241.3	127	no keyway	4	PRUTTON 200 CHD	323.85	419.1	228.6	18	3 or 4
IZPE ETR2	190.5	241.3	127	24	3	RUJA 9/EAGLE 3	349.25	420	228.6	18	3
EZPE S1	177.8	241.3	127	24	3	SAKAMURA SSR70	330.2	420	228.6	18	3
OMEGA RR6	171.45	241	127	12.7	3	SIMA RAP16	330.2	419.1	228.6	18	3 slotted
PRESSAVIT R112	203.2	280	127	12.7	3	SIMA RAP20	330.2	419.1	228.6	18	3 slotted
PRUTTON 75RKG	177.8	280	127	12.7	5	VIDEX VA3	228.6	419.1	228.6	18	3
RUJA No5	190.5	241.3	127	12.7	3	VIDEX VS3	228.6	419.1	228.6	18	3
SAKAMURA ACR30	190.5	240	127	12.7	3	VIDEX VS30	330.2	419.1	228.6	18	3
SAKAMURA SSR30	190.5	240	127	12.7	3	VIDEX VS35	330.2	419.1	228.6	18	2
SIMA RAV6	190.5	240	127	12.7	3 slotted	PRUTTON 300RTH	355.6	393.7	254	no keyway	2
SIMA RA7	190.5	240	127	12.7	3 slotted	PRUTTON 300LRTH	355.6	393.7	254	no keyway	2
SIMA RAV10	190.5	240	127	12.7	3 slotted	PRUTTON 400RKE	355.6	393.7	254	no keyway	2
WATERBURY 1	177.8	241.3	127	12.7	3 slotted	RUJA 10	342.9	520	254	25.Nis	2
WATERBURY 10	190.5	241.3	127	12.7	3 slotted	SAKAMURA SSR100	374.65	520	266.7	20	3

Machine	Model	Rotary die	Segment	Segment	Segment	Segment	Equivalent	# of	Keyway
		ID (d)	OD (D)	Angle	Group I (t)	Group II (h)	to:	Seg.
Bearkat	KI-30	127	240	120	min		SSR-30	3	1/2"/13
Bearkat	KI-50	127	340	120	min		SSR-50 (GR-4)
Capelli	101	140	241.3					5	No
Capelli	106/108/206	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
Crimela	RUL-T1	150	300	120 with cut-outs, Rotary with 4 holes				3	12
Crimela	RUL-T2	200	490				Square Segment	2
E.W.Menn	RW-3, RW5	40	120	90	1		GR-1	4	10
E.W.Menn	RW-8	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
E.W.Menn	RW-10	127	280	60		37	GR-3	3	1/2"
Fray	NF 1037/28591	133.35	225.25					3	1/2"
Grefe	2/4	60	150				slotted	3	18
Grefe	2/6	60	170					3	18
Hartford	PTR-1200	127	241.3	60		22.2	GR-2	4	1/2"
Hilgeland	SW0	40	120						12
Hilgeland	SW2	127	241.3				not GR-2	4	1/2"
Ingramatic	GR-1	40	120	90	1		GR-1	4	10
Ingramatic	GR-2	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
Ingramatic	GR-3	127	280	60		37.6	GR-3	3	1/2"
Ingramatic	GR-4	127	340	120	min		SSR-50 (GR-4)	3	13
Izpe	SO	54	172
Izpe	SOE	54	190
Izpe	S1-ETR	127	241.3				seg L=175mm	3	24
Nedschroef	BS-2	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
Nedschroef	BS-3, BS-4+C2	152.4	342.9	90		27	WAT-20	3	5/8"
Omega	RR-3, RR-4	40	120	90	1		GR-1	4	10
Omega	RR-6	127	241.3	90-120	2			3	1/2"-13
Omega	RR-10	127	280	60		37	GR-3	3	1/2"
Pressvit	R104	40	120	90	1		GR-1	4	10
Pressvit	R106/108	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
Pressvit	R112	127	280	60		37	GR-3	3	1/2"
Prutton	75-1 (RTHD)	139.7	235	D.T.
Prutton	75-3K (RTHE)	139.7	241.3	72	min			5	No
Prutton	75-4 (RTHE)	139.7	235	90	min			4	1/2"
Prutton	75-4K (RTHE)	139.7	241.3	90	min			4	No
Prutton	75-5K (RTHE)	127	241.3	72	min			5	1/2"
Prutton	75-6 (RKE)	127	235	90	min			4
Prutton	75-6K (RKG)	127	241.3	90	min		V-10 (GR-2)	4	13
Prutton	75-7K (RKG)	127	241.3	120	min				13
Prutton	125-1/4/101 (RTHD)	266.7	393.7	D.T.
Prutton	150-4 (RTH)	190.5	304.8	90	min			4	1/2"
Prutton	150-6/7 (RKE/E)	178	304.8	90/120	min			4/3	1/2"
Prutton	155-1 (RTHE)	190.5	279.4	D.T.
Prutton	155-3/102 (RTHE)	190.5	304.8	72	min			5
Prutton	155-5 (RKE)	178	304.8	72	min			5
Prutton	200-1 (RTHD)	266.7	406.4	D.T.
Prutton	200-4 (RTHE)	266.7	406.4	90	min			4
Prutton	200-6 (RKE)	228.6	406.4	90	min			4
Prutton	200-6K (RKEE)	228.6	420	90	min			4	18
Prutton	200-7K (RKEE)	228.6	420	120	min			3	18
Prutton	300-810 (RTH10)	254	393.7	90	min				No
Prutton	300-820 (RTH20)	254	393.7	180	min				No
Prutton	300-910 (LRTH10)	254	444.5	90	min				No
Prutton	300-920 (LRTH20)	254	444.5	180	min				No
Prutton	400-7 (RKE)	266.7	495.3	120	5				20
Ruja	#5; Eagle V	127	241.3	90-120	min		WAT-10
Ruja	#6; Eagle IV	152.4	342.9	90		27	WAT-20
Ruja	#`9; Eagle I	228.6	420	160	0-5			2	18
Ruja	#`9; Eagle III	228.6	420	120	0-5		SSR-70	3	18
Ruja	#10, 125	254	520	145	min			2	25.4
Sacma	RU2 TG	177.8	280					3	1/2"
Sacma	RU2 TG II	127	280	60		37	GR-3	3	1/2"
Sacma	SR-4	152.4	380	90-120				3-4
Sakamura	SSR-30	127	240	120	min		SSR-30	3	13
Sakamura	SSR-50	127	340	120	min		SSR-50 (GR-4)	3	13
Sakamura	SSR-50D	152.4	340	120	min			3	13
Sakamura	SSR-70	228.6	420	120	min		SSR-70	3	18
Sakamura	SSR-100	226.7	520	120	min			3	20
Sakamura	SSR-100-HD	266.7	520	120	min		SSR-100	3	20
Salvi	502/505/506	127	241.3	0				3-4	1/2"
Salvi	RB1	127	280	60		37	GR-3	3	1/2"
Saspi	RV-4	40	120	90	1		GR-1	4	10
Saspi	RV-12	127	304.8
Seny	D8 TRS	127	241.3					4	1/2"
Seny	RS12, D12-TRS	127	280	60		37	GR-3	3	1/2"
Sima	RAP-4	40	120	90	7.5	7.5	slotted	3	10
Sima	RAP-6	127	240	120	2		slotted	3	13
Sima	RAP-7	127	240	120	2		slotted	3	13
Sima	RAP-10/11/12	127	304.8	120	2		slotted	3	1/2"-13
Sima	RAP-16/20	228.6	419.1	120	5		slotted	3	18
Sima	RAP-25	228.6	419.1/420?	165	4		slotted	2	18
TLM	RS-6	40	120	90	1		GR-1	4	10
TLM	RS-8	127	241.3	90-120				3-4	1/2"
TLM	RS-12	127	280	60		37	GR-3	3	1/2"
TLM	RS-16	127	340	120	min		SSR-50 (GR-4)	3	13
Videx	V-00	40	120	90	1		GR-1	4	10
Videx	V-0	69.85	152.4	47		18	V-0	4	12
Videx	V-10, V-5	127	241.3	60		22.2	V-10 (GR-2)	4	1/2"
Videx	V-15	150	300	36		65.5	V-20	3	12
Videx	V-20	150	300	36		65.5	V-20	3	12
Videx	V-25	167.5	342.9	62		59	V-25	3	5/8"
Videx	V-30	228.6	419.1	65.5		72.5	V-30	3	18
Videx	V-35	228.6	419.1	100		72.5	V-35	2	18
Videx	VA-20-K	70	152.4	45	min		VA-20-K	6-8	bore
Waterbury	WAT-1P	127	241.3	120	3		slotted	3	1/2"
Waterbury	WAT-10	127	241.3	60		20.2	V-10 (GR-2)	4	1/2"
Waterbury	WAT-20	152.4	342.9	90		27	WAT-20	3	5/8

messageImage1686395406901

messageImage1686395406901